Video logging captures the complete visual and audio content of a broadcast transmission: the picture, the sound, the graphics, the on-screen text, and the metadata carried in the signal. It provides a complete record of what the audience saw and heard.
Audio logging captures the audio component of a broadcast transmission, including programme audio, advertising audio, secondary audio programmes, and audio metadata. It is used where a task needs analysis of the audio record rather than the complete video record.
In professional broadcast compliance workflows, audio and video logging are complementary functions rather than alternatives. Together they provide the complete compliance record a broadcaster needs to meet regulatory obligations and respond to commercial and legal requirements.
What video logging captures
Video logging captures the complete broadcast transmission as a video file, including picture, audio, graphics, on-screen text, and embedded metadata:
Video picture
The complete visual content of the broadcast is recorded at the full resolution and frame rate of the source signal: SD, HD, or 4K, depending on the broadcast standard. HDR content is preserved natively where the source signal carries HDR metadata.
Programme audio
The primary audio of the broadcast, including dialogue, music, effects, and programme sound, is captured alongside the video at full quality. Multiple audio tracks are recorded where the source signal carries them, such as stereo, surround, secondary audio programmes, and multi-language audio.
On-screen graphics and text
Lower thirds, tickers, chyrons, and on-screen graphics are part of the video record. They are captured as part of the picture rather than as separate data, so what appeared on screen at any moment is visible in the recording.
Embedded metadata
Closed captions, subtitles, timecode, ancillary data packets, and signal parameters carried within the broadcast signal are recorded alongside the video as part of the complete compliance record.
Timestamp burn-in
The date and time are burned directly onto the recorded video, so the timestamp is part of the picture and cannot be separated from the content. This provides clear evidence of when specific content aired.
What audio logging captures
Audio logging focuses specifically on the audio component of a broadcast transmission, with particular emphasis on:
Programme loudness
The loudness level of broadcast audio is measured continuously against the standards set by applicable regulations, such as the CALM Act and ATSC A/85 in the United States and EBU R128 in Europe. Continuous loudness measurement provides the technical evidence needed to demonstrate loudness compliance.
Commercial advertising audio
The audio of commercial advertisements is captured and logged for loudness compliance verification, advertising placement verification, and commercial dispute resolution. The CALM Act specifically requires that commercial advertising audio does not exceed the loudness of adjacent programming.
Secondary audio programmes
Broadcast signals often carry multiple audio tracks, such as primary language, secondary language, and descriptive audio for visually impaired viewers. Audio logging captures all audio tracks for secondary audio programme compliance verification.
Audio quality monitoring
Audio dropouts, noise, distortion, and synchronisation issues are detected and logged as part of the technical compliance record. Audio quality failures are compliance events that must be documented.
Music and rights monitoring
Audio content monitoring supports music rights compliance by identifying music tracks that aired and verifying that the appropriate licences were in place. Broadcasters and rights management organisations use it to verify broadcast performance data.
When video logging is the primary requirement
Video logging is the primary compliance requirement in the following contexts:
Content compliance and complaint response
When regulators or viewers file complaints about broadcast content, such as inappropriate material, scheduling violations, political advertising, or failures in children's programming, the evidence required is the video record of what aired. Audio alone does not provide the visual context needed to respond to a content complaint.
Advertising placement verification
Verifying that specific advertising content aired at the contracted time requires the video record: what was on screen, what was in the advertisement, and at what time on which channel.
Political advertising compliance
Political advertising compliance requires evidence of the complete advertisement, including the video, the audio, the on-screen text, and the disclosure, not just the audio component.
Legal proceedings
Legal proceedings involving broadcast content typically require the complete video record as evidence, not just the audio.
Technical signal quality verification
Verifying that the broadcast signal met technical standards, such as resolution, frame rate, and format parameters, requires the video record.
When audio logging is the primary requirement
Audio logging is the primary requirement in specific compliance contexts:
Loudness compliance verification
Demonstrating compliance with the CALM Act, EBU R128, or equivalent loudness standards requires continuous audio loudness measurement and logging, and does not necessarily need the complete video record.
Music rights and performance monitoring
Identifying music tracks broadcast and verifying performance licence compliance is an audio-specific function, because the visual content of the broadcast is not relevant to music rights monitoring.
Radio broadcast compliance
Radio broadcasters have no video component. Radio compliance logging is entirely audio-based, capturing programme audio, advertising audio, and station identification for regulatory and commercial compliance purposes.
Secondary audio programme compliance
Verifying that secondary audio programmes, such as descriptive audio and secondary language audio, were broadcast correctly is an audio-specific compliance function.
Audio quality incident investigation
Investigating audio quality failures, such as dropouts, noise events, and synchronisation issues, is an audio-specific technical function that may not require the complete video record.
The case for combined audio and video logging
In professional broadcast compliance workflows, audio and video logging are integrated functions within the same compliance recording platform rather than separate systems.
Separating audio and video compliance logging into different systems creates operational complexity: two archives to navigate, two sets of retrieval tools, two systems to maintain, and the risk of temporal misalignment between audio and video records of the same event.
Integrated audio and video logging captures both within the same recording file, with the video picture and the programme audio together, under the same timestamp, in the same archive. When a compliance event requires both the video record and the audio record, a single retrieval from the integrated archive provides both.
For broadcasters, the practical question is less about audio logging versus video logging and more about whether the compliance recording platform captures the complete audio and video record together, with the temporal accuracy and archive accessibility needed for professional compliance workflows.
How SyncWIZ handles audio and video logging
SyncWIZ records the complete broadcast transmission, video and audio together, from SDI, HDMI, NDI, SRT, RTMP, HLS, ST2110, WebCapture, YouTube Live, and IP camera sources simultaneously.
Multi-track audio capture
SyncWIZ captures multiple audio tracks from broadcast sources, including primary audio, secondary audio programmes, and multi-language audio tracks carried in the source signal. All audio tracks are recorded alongside the video in the same file.
Audio codec support
SyncWIZ supports AAC, AC-3 Dolby Digital (floating and fixed point), MP2, MP3, Ogg Vorbis, and Direct Stream Copy for audio encoding. The appropriate audio codec is configured per recording profile alongside the video codec.
Multiple encoding profiles per channel
The same source records to multiple encoding profiles simultaneously: proxy quality for fast review and archive quality for legal evidence. Audio is included in all recording profiles.
Date and time overlay
The timestamp is burned directly onto the recorded video, providing the time reference for both the video and audio content of the recorded file.
SyncPlayer Web
Browser-based playback covers all recorded channels, with video and audio together and synchronised multi-channel timeline navigation. All recorded audio tracks are accessible through the same playback interface.
Radio broadcast compliance logging
Radio broadcasters have specific compliance logging requirements that are entirely audio-based. Regulatory frameworks in most markets require radio broadcasters to maintain recordings of all transmitted programming for defined retention periods.
SyncWIZ records from audio sources through the same multi-channel workflow as video sources. Where mixed television and radio compliance logging is required, it captures radio broadcast audio alongside television channels in the same recording session.
How SyncWIZ differs from legacy audio and video logging systems
Many traditional broadcast compliance logging systems separate audio monitoring and video recording into different workflows or different systems. This creates operational complexity, with two archives, two sets of retrieval tools, and temporal misalignment between audio and video records.
SyncWIZ captures audio and video together in the same recording file, so the complete broadcast transmission sits in a single integrated archive. There are no separate systems or workflows, and no temporal misalignment between audio and video records.
GPU-accelerated processing on NVIDIA, Intel, or AMD hardware handles the full audio and video pipeline simultaneously. Multiple instances run on a single GPU server, so channels can be added without changing hardware platforms.
FAQs
What is the difference between audio logging and video logging in broadcast compliance?
Video logging captures the complete broadcast transmission, including picture, audio, graphics, metadata, and on-screen text, as an integrated video file. Audio logging focuses on the audio component, such as loudness levels, music content, and secondary audio programmes. Professional broadcast compliance workflows need both, and they work best as integrated functions within the same recording platform.
Does SyncWIZ capture multiple audio tracks from broadcast sources?
Yes. SyncWIZ captures multiple audio tracks from broadcast sources, including primary audio, secondary audio programmes, and multi-language audio tracks carried in the source signal. All audio tracks record alongside the video in the same file.
Is audio logging required for radio broadcast compliance?
Yes. Radio broadcast compliance logging is entirely audio-based, capturing programme audio, advertising audio, and station identification for regulatory and commercial compliance purposes. SyncWIZ records from audio sources through the same multi-channel workflow as video sources.
How does integrated audio and video logging improve compliance workflows?
Integrated audio and video logging captures both within the same recording file, with the same timestamp, the same archive, and the same retrieval interface. When a compliance event requires both the video record and the audio record, a single retrieval provides both. Separate audio and video systems need separate retrievals from separate archives, with the risk of temporal misalignment between the two records.
Does SyncWIZ support HDR audio metadata from broadcast sources?
SyncWIZ supports HDR metadata from SDI and NDI sources natively. HDR audio metadata carried in the broadcast signal is preserved through the GPU processing pipeline alongside the video HDR metadata.