Live video gateway

ST2110 to NDI converter software

ST2110 to NDI conversion takes uncompressed IP media signals from SMPTE ST2110 infrastructure and converts them in real time to Network Device Interface (NDI) format. This makes ST2110 sources available to the wider NDI production ecosystem without dedicated gateway hardware.

SMPTE ST2110 is the professional standard for uncompressed IP video, audio, and ancillary data transport in modern broadcast facilities. As facilities move from SDI to IP infrastructure, ST2110 is becoming the primary signal standard for studio, production, and transmission environments. NDI is a widely used IP standard for software-based production, allowing production systems, multiviewers, graphics platforms, and software tools to exchange broadcast-quality video over standard Ethernet networks.

ST2110 and NDI serve different roles in the IP broadcast ecosystem. ST2110 provides uncompressed, deterministic, precisely timed IP media transport, which is essential for critical broadcast infrastructure. NDI provides flexible, software-friendly IP video distribution that a wide range of production tools and systems can use without the precision timing and uncompressed quality of ST2110.

Converting ST2110 to NDI bridges these two ecosystems. It makes high-quality signals from ST2110 infrastructure available to NDI production tools, multiviewers, recording systems, and software, without requiring every downstream tool to support ST2110 natively.

BridgeWIZ performs this conversion in real time through a full GPU processing pipeline on standard server hardware.

Why ST2110 to NDI conversion is needed

ST2110 infrastructure delivers uncompressed IP media, which is high-bandwidth, precisely timed, and dependent on specific network infrastructure and compatible hardware. Not all production tools, software systems, and monitoring solutions support ST2110 natively.

NDI is supported by a far wider ecosystem of production software, including virtual production tools, graphics systems, software multiviewers, recording platforms, streaming tools, and monitoring applications. Converting ST2110 to NDI makes ST2110 infrastructure accessible to these tools without separate hardware interfaces or protocol-specific inputs at every workstation and software system.

Common ST2110 to NDI conversion scenarios:

ST2110 to software production tools

Virtual production environments, software-based production switchers, and graphics platforms that support NDI but not ST2110 receive ST2110 sources as NDI, integrating ST2110 infrastructure with software production workflows.

ST2110 to NDI multiviewers

Software multiviewers and monitoring tools that accept NDI display ST2110 sources without requiring dedicated ST2110 monitoring hardware at every monitoring position.

ST2110 to recording systems

NDI-based recording systems and compliance recording platforms access ST2110 sources for recording without dedicated ST2110 capture hardware.

ST2110 to remote access

ST2110 sources are converted to NDI for distribution beyond the ST2110 network, so remote operators and production staff can access them through NDI on standard network infrastructure.

Mixed ST2110 and NDI production environments

Facilities operating both ST2110 infrastructure and NDI-based production tools convert between the two within the same BridgeWIZ deployment, alongside other protocol conversions and streaming outputs.

How ST2110 to NDI conversion works in BridgeWIZ

BridgeWIZ performs ST2110 to NDI conversion through a five-stage GPU processing pipeline:

  1. Stage 1: ST2110 ingest

    BridgeWIZ receives the ST2110 IP media stream from the facility network, including ST2110-20 video essence, ST2110-30 audio essence, and ST2110-40 ancillary data as configured. ST2110 is treated as a native input source within the BridgeWIZ multi-source workflow.

  2. Stage 2: GPU decoding

    The received ST2110 signal passes into the GPU processing pipeline, where it is decoded and processed on NVIDIA, Intel, or AMD GPU hardware.

  3. Stage 3: GPU processing

    The decoded video passes through the GPU processing pipeline for format conversion, resolution scaling and frame rate conversion where required, and graphics overlay if configured. All processing runs on GPU hardware.

  4. Stage 4: NDI encoding

    The processed video is encoded as full-bandwidth NDI at broadcast quality for professional facility workflows. The NDI source name is configurable per instance and appears automatically in NDI discovery on the local network.

  5. Stage 5: NDI network output

    The NDI stream is published to the local network, where NDI-compatible devices, software, and systems can discover and receive it immediately without manual IP configuration.

Simultaneous outputs from one ST2110 source

BridgeWIZ converts ST2110 to NDI as one output among several simultaneous destinations. The same ST2110 source delivers simultaneously to:

  • NDI: full-bandwidth network output for production tools and software
  • SRT: remote contribution or distribution outside the facility
  • RTMP: streaming to YouTube, Facebook, or other platforms
  • SDI: physical output to legacy broadcast hardware
  • UDP: multicast or unicast network delivery
  • Local ISO file: independent recorded file for post-production and archive

One ST2110 source feeds multiple simultaneous outputs in a single GPU processing pass, with no additional hardware.

Live graphics on ST2110 to NDI conversion

BridgeWIZ's built-in HTML graphics engine adds live broadcast graphics to ST2110 sources during conversion to NDI. Graphics are rendered in the GPU pipeline and embedded in the NDI output stream:

  • Scrolling tickers and news banners
  • Lower thirds and name straps
  • Logo overlays and watermarks
  • Date and time displays
  • Custom HTML templates

Add channel identification, live news graphics, or branding to ST2110 sources during conversion, without a separate CG system. NDI receivers on the network receive the complete signal, including graphics.

Resolution scaling during ST2110 to NDI conversion

BridgeWIZ performs resolution scaling and format conversion during ST2110 to NDI conversion:

  • 4K UHD ST2110 source converted to HD NDI for bandwidth-efficient distribution on the production network
  • HD ST2110 source converted to SD NDI where required
  • Frame rate conversion where NDI receivers require a different frame rate

The NDI output format is fully independent of the ST2110 source format, so 4K ST2110 infrastructure can feed HD NDI production tools without separate downconversion hardware.

ST2110 to NDI for compliance recording

ST2110 sources converted to NDI are accessible to NDI-compatible compliance recording systems. This allows compliance recording of ST2110 infrastructure without dedicated ST2110 capture hardware at the compliance recorder.

SyncWIZ, Tricube's broadcast compliance recording platform, records NDI sources natively. SyncWIZ records ST2110 sources converted to NDI by BridgeWIZ for compliance logging, giving a complete compliance recording workflow for ST2110 broadcast infrastructure in software on standard server hardware.

Multi-instance ST2110 to NDI conversion

Run multiple independent BridgeWIZ instances on a single GPU server, each converting a different ST2110 source to NDI at the same time. Each instance publishes its own, independently named NDI source to the network.

For facilities with large ST2110 infrastructures that need many simultaneous ST2110 to NDI conversions, multiple instances on one GPU server can take the place of several dedicated hardware gateway appliances.

How BridgeWIZ differs from hardware ST2110 to NDI gateways

Dedicated hardware ST2110 to NDI gateway appliances perform fixed conversions on dedicated equipment, typically with fixed channel counts, fixed output configurations, and significant hardware investment per channel.

BridgeWIZ performs ST2110 to NDI conversion in software on GPU-accelerated server hardware, with simultaneous additional outputs including SRT, RTMP, SDI, UDP, and ISO recording. Multiple instances on one server handle several ST2110 to NDI conversions at once without additional hardware investment.

FAQs

What is ST2110 to NDI conversion used for in broadcast?

ST2110 to NDI conversion makes SMPTE ST2110 IP media sources accessible to NDI production tools, multiviewers, recording systems, and software that support NDI but not ST2110. It bridges ST2110 broadcast infrastructure with the wider NDI production ecosystem, so software production tools, monitoring systems, and recording platforms can access ST2110 sources without dedicated ST2110 hardware interfaces.

What is the difference between ST2110 and NDI?

ST2110 provides uncompressed, deterministic, precisely timed IP media transport, designed for critical broadcast infrastructure that needs exact synchronisation and uncompressed quality. NDI provides flexible, software-friendly IP video distribution over standard Ethernet, which a wide range of production tools can use without precision timing infrastructure. ST2110 to NDI conversion bridges these two ecosystems within the same facility.

Does BridgeWIZ support simultaneous outputs alongside NDI from ST2110 sources?

Yes. BridgeWIZ converts ST2110 to NDI as one output among several simultaneous destinations, including SRT, RTMP, SDI, UDP, and local ISO recording, all from the same ST2110 source in one GPU processing pass.

Can ST2110 sources converted to NDI be recorded by SyncWIZ for compliance?

Yes. ST2110 sources converted to NDI by BridgeWIZ are accessible to SyncWIZ, Tricube's compliance recording platform, which records NDI sources natively. This provides a complete compliance recording workflow for ST2110 infrastructure using software on standard server hardware.

How many simultaneous ST2110 to NDI conversions can BridgeWIZ handle?

Multiple BridgeWIZ instances run independently on a single GPU server, each converting a different ST2110 source to NDI at the same time. The number of conversions scales with the GPU server specification, without buying additional hardware gateway appliances.

Get started

See BridgeWIZ working with your sources

Book a demo and our broadcast engineers will demonstrate BridgeWIZ using your sources, destinations, and channel requirements.