Live video gateway

ST2110 to SRT converter software

ST2110 to SRT conversion takes uncompressed IP media signals from SMPTE ST2110 infrastructure and converts them in real time to Secure Reliable Transport (SRT) for delivery over public IP networks. This lets broadcast-quality ST2110 sources reach remote production locations, distribution partners, streaming platforms, and affiliate stations over internet connections, where traditional ST2110 transport is not practical.

SMPTE ST2110 is designed for controlled, high-bandwidth facility networks. Its uncompressed video transport requires 3 Gbps or more per HD channel, which is practical on dedicated facility infrastructure but not over public internet connections. For SRT delivery, HD video is typically compressed to 5 to 20 Mbps, and SRT adds error correction, retransmission, and encryption. This makes it reliable over unpredictable networks where ST2110 cannot operate.

ST2110 to SRT conversion is the bridge between the high-quality, controlled environment of ST2110 facility infrastructure and the wider world of IP distribution, including remote production, affiliate delivery, streaming platforms, and cloud workflows.

BridgeWIZ performs this conversion in real time through a full GPU processing pipeline on standard server hardware, with additional simultaneous outputs and live graphics included.

Why ST2110 to SRT conversion matters

Broadcast facilities investing in ST2110 infrastructure need to distribute content beyond the facility network. Remote production teams need access to ST2110 sources, streaming platforms need broadcast-quality feeds, and affiliate stations need programme distribution. All of these destinations are outside the ST2110 network, and SRT is a widely used professional protocol for reliable delivery to them over IP.

ST2110 to SRT conversion connects ST2110 infrastructure to the broader broadcast ecosystem without separate contribution encoders, intermediate format conversion steps, or additional hardware for each output destination.

Common ST2110 to SRT conversion scenarios:

Remote production contribution

ST2110 facility sources are converted to SRT for delivery to remote production hubs. Remote editors, producers, and technical staff can then access facility ST2110 sources over IP connections, without physical ST2110 infrastructure at the remote location.

ST2110 to streaming platform delivery

ST2110 programme feeds are converted to SRT for delivery to streaming CDNs and platforms that accept SRT ingest. This connects professional IP media infrastructure directly to online distribution without intermediate format steps.

Affiliate and partner distribution

ST2110 network programme feeds are converted to SRT for delivery to affiliate stations, distribution partners, and broadcast networks over IP, as an IP-based alternative to satellite distribution.

Cloud contribution from ST2110 facility

ST2110 facility sources are converted to SRT for cloud ingest, so cloud-based production, transcoding, and distribution workflows can access facility ST2110 content over standard internet connections.

Remote monitoring of ST2110 infrastructure

ST2110 sources are converted to SRT for delivery to remote monitoring locations. Technical operations staff can then monitor facility ST2110 infrastructure remotely, without physical access to the facility network.

How ST2110 to SRT conversion works in BridgeWIZ

BridgeWIZ performs ST2110 to SRT conversion through a five-stage GPU processing pipeline:

  1. Stage 1: ST2110 ingest

    BridgeWIZ receives the ST2110 IP media stream from the facility network. ST2110 is treated as a native input source within the BridgeWIZ workflow, alongside SDI, NDI, and all other supported source types.

  2. Stage 2: GPU decoding

    The received ST2110 signal passes into the GPU processing pipeline, where it is decoded and processed on NVIDIA, Intel, or AMD GPU hardware.

  3. Stage 3: GPU processing

    Format conversion, resolution scaling, frame rate conversion, and graphics overlay all run on the GPU at the same time.

  4. Stage 4: SRT encoding

    The processed video is encoded to H.264 or H.265/HEVC using NVIDIA NVENC, Intel Quick Sync, or AMD AMF hardware acceleration, at the bitrate, quality, and latency settings configured for the SRT destination.

  5. Stage 5: SRT output delivery

    The encoded stream is sent to the configured destination as SRT output in caller, listener, or rendezvous mode, with optional AES-128 or AES-256 encryption.

SRT configuration for ST2110 conversion

BridgeWIZ provides full SRT configuration for ST2110 to SRT conversion:

Connection modes

Listener: BridgeWIZ waits for incoming SRT caller connections at a configured port. Caller: BridgeWIZ initiates connections to remote SRT listeners. Rendezvous: a peer-to-peer connection for firewall traversal.

Encryption

AES-128 and AES-256 encryption secures ST2110 content in transit over public networks, with a configurable passphrase for each SRT output.

Latency configuration

The SRT latency buffer is configurable for each output, so it can be matched to network conditions and the distance between facility and destination.

Bitrate and quality

H.264 or H.265/HEVC encoding at a configurable bitrate, from low-bandwidth internet delivery up to high-quality contribution suitable for professional broadcast receive.

Simultaneous outputs from one ST2110 source

BridgeWIZ converts ST2110 to SRT as one output among several simultaneous destinations. The same ST2110 source delivers simultaneously to:

  • SRT: remote contribution, distribution, or cloud delivery
  • NDI: full-bandwidth network output for local production tools
  • RTMP: streaming to YouTube, Facebook, or other platforms
  • SDI: physical output to legacy broadcast hardware
  • UDP: multicast or unicast network delivery
  • Local ISO file: independent recorded file for post-production and archive

One ST2110 source feeds multiple simultaneous outputs in a single GPU processing pass, with no additional hardware.

Live graphics on ST2110 to SRT conversion

BridgeWIZ's built-in HTML graphics engine adds live broadcast graphics to ST2110 sources during conversion to SRT. Graphics are rendered in the GPU pipeline and embedded in the SRT output stream:

  • Scrolling tickers and news banners
  • Lower thirds and name straps
  • Logo overlays and watermarks
  • Date and time displays
  • Custom HTML templates

Add channel identification, live news graphics, or compliance overlays to ST2110 sources during conversion to SRT, without a separate character generator (CG) system.

Resolution scaling during ST2110 to SRT conversion

BridgeWIZ performs resolution scaling and frame rate conversion during ST2110 to SRT conversion, independently of the ST2110 source parameters:

  • 4K UHD ST2110 source converted to HD SRT for bandwidth-efficient delivery over IP
  • HD ST2110 source converted to SD SRT for legacy or bandwidth-constrained destinations
  • Frame rate conversion where the SRT destination requires a different frame rate

The SRT output format is fully independent of the ST2110 source format.

ST2110 to SRT for compliance recording at remote locations

ST2110 facilities that distribute content to remote locations via SRT can use SyncWIZ, Tricube's broadcast compliance recording platform, at the remote receiving end to record the SRT contribution for compliance purposes. SyncWIZ records SRT sources natively, so it can log the received SRT feed at remote playout centres, affiliate stations, and distribution hubs without dedicated hardware recorders.

Multi-instance ST2110 to SRT conversion

Run multiple independent BridgeWIZ instances on a single GPU server, each converting a different ST2110 source to SRT simultaneously. Each instance operates independently with its own ST2110 input, its own SRT output configuration, and its own graphics setup.

For ST2110 facilities distributing multiple channels simultaneously, to several remote destinations, streaming platforms, or affiliate stations, multiple instances on one GPU server can handle the conversions without additional hardware, within the server's capacity.

How BridgeWIZ differs from hardware ST2110 to SRT converters

Hardware ST2110 to SRT conversion appliances perform fixed conversions on dedicated equipment. They typically have fixed channel counts and limited output options, and need significant hardware investment for each channel.

BridgeWIZ performs ST2110 to SRT conversion in software on GPU-accelerated server hardware, with simultaneous NDI, RTMP, SDI, UDP, and ISO recording outputs from the same ST2110 source. Multiple instances on one server can handle several simultaneous conversions without additional converter appliances.

FAQs

What is ST2110 to SRT conversion used for in broadcast?

ST2110 to SRT conversion allows broadcast-quality ST2110 IP media sources to be delivered over public IP networks to remote production locations, streaming platforms, affiliate stations, and cloud workflows, where ST2110's high-bandwidth uncompressed transport is not practical. SRT's error correction, encryption, and bandwidth efficiency make it the appropriate protocol for distributing ST2110 content beyond the facility network.

Why can't ST2110 be sent directly over the public internet?

ST2110 transports uncompressed video, which requires 3 Gbps or more per HD channel. Public internet connections cannot reliably handle this bandwidth. For SRT delivery, HD video is compressed to around 5 to 20 Mbps, and SRT adds error correction for reliable delivery over unpredictable networks. This makes SRT the appropriate protocol for internet distribution of ST2110 facility content.

Does BridgeWIZ support simultaneous outputs alongside SRT from ST2110 sources?

Yes. BridgeWIZ converts ST2110 to SRT as one output among several simultaneous destinations: NDI, RTMP, SDI, UDP, and local ISO recording, all from the same ST2110 source in one GPU processing pass.

Can SyncWIZ record SRT feeds from ST2110 sources for compliance?

Yes. SyncWIZ records SRT sources natively, so it can log SRT feeds received from ST2110 facilities at remote locations for compliance. BridgeWIZ converts ST2110 to SRT at the sending end, and SyncWIZ records the SRT feed at the receiving end.

How many simultaneous ST2110 to SRT conversions can BridgeWIZ handle?

Multiple BridgeWIZ instances run independently on a single GPU server, each converting a different ST2110 source to SRT simultaneously. Channel count scales with the GPU server specification, without buying additional hardware converter appliances.

Get started

See BridgeWIZ working with your sources

Book a demo and our broadcast engineers will demonstrate BridgeWIZ using your sources, destinations, and channel requirements.